Formwork and formwork system for concrete
The ALUFORT aluminum system is made up of a series of shores, with falling head, supporting a structure of aluminum panels reciprocally connected through toothed section beams. All elements composing the system weigh max. 20 kg, thus they can be manually handled, for a higher speed and smoothness. The fastening along the perimeter is obtained with wooden shims supported by ALUFORT Faresin elements, such as: fixed head, combined head and stirrup for falling head. The wooden shims around the pillars shall be instead supported by shimming sections.
• The utilization of less props (with only one prop you can build a surface of 3,375 mq);
• The possibility to reuse the panels and the toothed beams after few days from the casting (it depends from the ceiling thickness and the concrete consistency);
• The saving of planting and removing time;
• The possibility to use both ALU UP2 props and high capacity props.