FILAACTIVE1 - Active mould Remover.
What It’s For
Rapidly removes mould and sanitises stone, plaster, cement, grouting, ceramic, glass and marmorino plaster surfaces.
Easy-to-use, ergonomic container with spray applicator.
Ideal viscosity: can be easily applied to walls.
Acts rapidly and effectively within a few minutes.
Effectively removes mould from grouting.
Materials to be treated
500 ml bottles with spray nozzle (trigger): 12-piece cartons.
HOW TO USE IT
Ready to use: no dilution required
Spray FILAACTIVE1 directly onto the surface to be cleaned, from a distance of about 15-20 cm, while keeping the bottle upright. Leave to act for approximately 15 minutes. Soak up any excess product with a damp cloth to prevent dripping. Repeat if necessary, then wipe the surface clean with a damp sponge.
Caution: do not spray on plants, fabrics and metals. Should this occur, wash immediately with water. Do not use on new polished stone.
Caution: before using on coloured plaster, first try on a small section to avoid possible colour alterations.
• Keep out of reach of children.
• Do not disperse into the environment after use.
• Do not use in conjunction with acids. It may produce hazardous gas (chlorine).
• Ventilate the room during and after application.
• Do not remove dry mould in order to prevent dispersion of the spores.
Storage temperature: from 5° to 30° C.
The product should be applied to materials with temperature between 5° and 30°C.
Non-ionic surfactants < 5%, chlorine bleaches 5-15%.Contains: 5% active chlorine solution.
UK MARKET ONLY: HSE NO 9667.