Cleaner for epoxy residues
FILACR10 Cleaner for epoxy residues
What It’s For
High viscosity liquid detergent for cleaning epoxy grout residues, stains and streaks from wall and floor surfaces.
Ideal for non-absorbent materials such as porcelain, glazed ceramic and glass mosaics.
Due to its viscosity it removes epoxy grout stains and above from surfaces.
It is also effective in removing significant, consolidated residues.
Does not affect material.
Pleasant almond fragrance.
Materials to be treated
Glazed ceramic tiles
Polished quarry tiles
1 litre cans in boxes of 12.
HOW TO USE IT
Dilution: from pure to 1:1 depending on the type of residues.
Shake before use.
Removal of consolidated filler residues (once the applied grout filler is ready for use): apply the undiluted product using a flat brush and thoroughly cover all residues. Leave for about 30 minutes. Rub with an abrasive sponge or spatula to remove larger residues. A single-disc machine fitted with a suitable disc can be used for floors. Rinse thoroughly. In case of stubborn residues, repeat the application and leave the product to act for longer. Removal of fresh residues: wait roughly one hour after grouting. Dilute the product 1:1 in water. Apply and work over using a soft pad without applying excessive pressure. Rinse thoroughly. To avoid ruining fresh grouts, do not leave the product to act for more than 2-3 minutes.
Always test on a small area of the surface to check the material’s resistance and find out optimum waiting times for best results. Do not use on absorbent materials.
Do not use on wood. Do not use on methacrylate surfaces. Check the resistance of metal surfaces to the product before use.
• Keep out of reach of children.
• Do not disperse into the environment after use.
Storage temperature: from 5° to 30° C
The product should be applied to materials with temperature between 5° and 30° C.
Soap more than 5% but less than 15%.