Flooring protection

Add to wishlist

More on Brand


San Martino di Lupari, Italy
Contact the company
Name of product/article



Flooring protection

FILAMP90 ECO PLUS Stain-proofing protector without hydrocarbon solvents
What It’s For
Natural finish stain-proofing sealant. 
The best environmentally-friendly stain protection for porcelain tiles, natural stone, marble and granite with polished, brushed and matt honed finishes. 
Reduces absorption without affecting the material's natural look. 
Impregnates, protects, and makes cleaning easier. 
It is also ideal for grout joints, ceramic and crackle effect surfaces, resin-marble, and stone slabs. 
Is also suitable for treating coloured cement tiles and reconstructed stones.
Contributes towards LEED credits. 
Hydrocarbon solvent free: environmentally-friendly treatment 
Due to its water-base, it withstands residual humidity and can therefore be applied 24-48 hours after the initial wash, making treatment quicker. 
Single-coat application: remove, apply and rub in gently until absorbed as this is not applicable in all instances. 
Does not form surface film and does not yellow. 
It is ideally suited for protecting kitchen and bathroom tops. 
This product is tested and certified food-safe. 
The surface can be walked on after just 4 hours.
Materials to be treated
Polished porcelain tile
Natural stone
250 ml flasks in boxes of 12. 
1-litre cans in boxes of 6. 
5-litre cans in boxes of 4.

Further info from manufacturer on FILAMP90 ECO PLUS
Further details
No dilution required: ready to use.
For natural stone with matte honed finish: on dry clean surfaces apply FILA MP90 ECO PLUS ‘to saturation’ using a brush or fleece pad, working completely into the material. Remove any excess product that has not been absorbed using a cloth or kitchen paper.
For natural stone with polished finish: apply one even coat of FILA MP90 ECO PLUS on dry clean surfaces using a brush or fleece pad. Leave for 10 minutes, and then use a cloth or kitchen paper soaked in the product to make sure the application is uniform and remove any unabsorbed excess. Rub it gently in to ensure it penetrates and remove any excess
For polished porcelain tile and dense polished marble: remove the excess after 4 hours in the same way as for polished materials.
Advice from the expert: During maintenance work regarding natural and reconstructed stones and coloured cement tiles, you can apply a finishing wax according to the material and the desired effect.
Caution: Before applying to the entire surface, test the product on a small area to check for colour changes. Do not apply the product if externally rain is forecast.
• Keep out of reach of children.
• Do not disperse into the environment after use.
• Outdoor flooring must be properly laid before being treated and must satisfy all the specific requirements, including: adequate sloping, properly executed expansion joints, perfect isolation from the underlying ground, proven compatibility with sub-zero temperatures.
• Ventilate the premises well during use and while the product is drying.
• It does not protect marble and limestone from acid.
Storage temperature: from 5° to 30° C
The product must be applied to material with a temperature of between 10° and 30°C.
Water suspension of organic resins.

You might also like...
Recently Viewed