FILAPW10 Pre-fixing efflorescence-blocking protector.
What It’s For
Efflorescence blocking sealant to be applied on the back of tiles and absorbent paving slabs.
The product stops contaminants rising up from the substrate to the material surface (salts, tannin, oxides etc.), preventing the formation of streaks and/or stains.
Pre fixing protector.
Specific product for natural stones, granite, marble, agglomerates, terracotta and absorbent materials.
The product stops contaminants rising up from the substrate and prevents the formation of stains and streaks on the surface.
It does not form a surface film and allows treated materials to breathe.
It does not alter the adhesive and grouting adhesion (UNI EN 1348- 2009 e ASTM C482-02 R-2009).
Water-based product - VOC free.
Ideal for floors and all surfaces.
Materials to be treated
Back Surface of natural Stones
Terracotta and absorbent materials
5 litre flasks in box of 4
HOW TO USE IT
No dilution required: ready to use.
Thoroughly clean the back of the tile or slab, removing dust and residues. Apply the product evenly and continuously on the back and on the side of the material using a large flat paintbrush or airless pump, trying to avoid pooling.
Stand the floor slabs back to back and let them dry for 24 hours before laying them.
• Keep out of reach of children.
• Do not disperse into the environment after use.
• Protect can from frost.
Storage temperature: from 5° to 30° C
The product must be applied to material with a temperature of between 10° and 30°C.
Single component system with silicon organic compound base.