Matt look wax

Get directly in touch with Fila

Add to wishlist

More on Brand


San Martino di Lupari, Italy
Contact the company
Name of product/article



Matt look wax

FILAMATT Natural-effect protective wax.
What It’s For
For floor maintenance and matt finish for treatments of terracotta, quarry tiles, tumbled marble and natural stone floors. 
The ideal finishing coat after the application of a water-based waterproofing sealer. 
Ideal on internal walls in brick and natural stone to prevent flaking.
Provides natural finish. 
Highly concentrated: can be diluted according to requirements. 
Can be polished to achieve a satin finish. 
Completely removable. 
Has a high self-levelling capacity
Materials to be treated
Quarry tiles 
Unpolished stone and agglomerates
1 litre cans in boxes of 12. 
5-litre cans in boxes of 4.

Further info from manufacturer on FILAMATT
Further details

For the protection of floors and bare walls

Dilute FILAMATT slightly to make it more fluid and easier to apply by adding a glass of water per litre of product. On a clean and dry surface, apply one even coat of FILAMATT using a fleece pad or cloth (brush). Wait until completely dry (about an hour) and then apply a second coat in the opposite direction to the first (i.e. horizontal if previously applied vertically or vice-versa). The floor can be walked on after one hour. For a greater sheen, buff with a floor polisher or a wool cloth. If treating terracotta and highly absorbent natural stone (limestone, sandstone, old quarries, rough quartzite), we recommend a base coat of a water-proofing product such as FILAFOB or FILAW68.

For maintenance:

Restoring finish (every 2-3 months): after cleaning the surface with a diluted solution of FILACLEANER (1:200), apply FILAMATT diluting 500 ml of product in 5 litres of water. The floor can be walked on once it is dry. Restoring protection (once a year): apply slightly diluted wax (200 ml of water per litre of product) using a fleece pad, cloth or other applicator. The floor can be walked on once it is dry


The product can be removed by using the specific wax-remover for water-based waxes FilaPS87. Not recommended for use on outdoor surfaces or in damp environments and where water remains (bathrooms, showers).


Keep out of reach of children.

Do not disperse into the environment after use.

Store at room temperature.; Protect can from frost.


Storage temperature: from 5° to 30° C

The product must be applied to material with a temperature of between 10° and 30°C.


Aqueous emulsion of hard waxes and polymers with addition of matting agent and other appropriate additives.

You might also like...
Recently Viewed