Penetrating sealer for natural stone and cement
HYDROREP Solvent-based water-repellent protector
What It’s For
Protects outdoor floors from water and damp
Makes walls and coverings water-repellent
Ideal for cement
Protects grout joints
Protects against deterioration due to weather conditions
It provides a breathable, lasting and renewable protection
Does not affect the material’s natural look
Does not yellow with ageing or with any environmental condition
High penetration capacity
It has high coverage
Prevents moss and mould formation
It protects against efflorescence
Materials to be treated
Unpolished natural stones and agglomerates
1-litre cans in boxes of 12.
5-litre cans in boxes of 4.
HOW TO USE IT
No dilution required: ready to use.
Apply evenly with a large flat paintbrush on perfectly clean and dry surface. On vertical surfaces spray the product (airless system), taking care to use the correct volume.
You can apply the product once or twice, depending on the absorbing capacity of material, waiting 24 hours between one coat and the next. Apply one coat on low-absorbency natural stones (such as slate), and two coats on more absorbent natural stones or on cement. For outdoor surfaces where oil-repellent qualities are also required, after 24 hours apply a finishing coat of FILAFOB.
diluted solution of FILACLEANER
On natural stone carry out a patch test on a small surface area to check for any changes in colour. Do not apply the product externally if rain is forecast.
• Keep out of reach of children.
• Do not disperse into the environment after use.
• It does not protect marble and limestone from acid.
• The use of a single-disc cleaning machine is permitted only if it is perfectly undamaged.
Outdoor flooring must be properly laid before being treated and must satisfy all specific requirements, including: adequate sloping, properly executed expansion joints, perfect insulation from underlying ground, proven compatibility with sub-zero temperatures.
Storage temperature: from 0° to 30°C The product should be applied to materials with temperature between 5° and 30° C.
A mixture of siloxane compounds dispersed in de-aromatised hydrocarbon solvent.