HOW TO USE IT
Dilution: ready to use.
For wood: apply 2 coats of FILAPRO130 2-3 hours apart, onto clean, well sanded wood (maximum grain size 180) , using a big brush or wax fleece pad applicator. Rub in well and remove any excess, then finish with FILAPARQUET NATURE if laid as internal flooring. Can also be used as a base-coat for finishing waxed indoor surfaces with FILAWOOD.
For terracotta and dark stone without light veins: on a clean and dry surface, apply one coat of FILAPRO130 using a big brush or wax applicator. Rub in well and remove any excess with a clean cloth. Indoors, surfaces can be finished with paste waxes (FILANATURWAX) and/or liquid waxes (FILAMATT, FILASATIN or FILALONGLIFE).
Do not use on pale-coloured stone. The product can be diluted with FILASOLV by up to 50% when treating almost non-absorbent materials. Carry out a patch test on a small surface area to check for any changes in colour. Do not apply the product externally if rain is forecast.
• Keep out of reach of children.
• Do not disperse into the environment after use.
• Ventilate the premises well during use and while the product is drying.
• Repeated exposure may cause skin dryness or cracking.
• Wood preserver containing vegetable oils and natural resins dispersed in a blend of aliphatic and natural solvents.
Storage temperature: from 0° to 30°C The product must be applied to material with a temperature of between 10° and 30°C.
Preserver with a base of vegetable oils and natural resins suspended in a blend of aliphatic and natural solvents. Pursuant to It.Leg.Dec. No.161/06: category: Non-film forming penetrating product for wood. EU limit value for this product (Cat: 1/f): 700 g/l (2010). This product contains no more than 572.56 g/l.