“wet look” protection for natural stone
FILAWET Solvent-based wet-look consolidating protector
What It’s For
Gives wet look to untreated surfaces (tumble finishes, flame finishes, natural sawn finishes).
Protects material from water and oil.
Consolidating effect treatment.
Provides a wet effect that can be intensified with several applications.
Does not yellow with ageing or due to any environmental condition.
Does not scrape from surface.
Materials to be treated
Unpolished natural stones and agglomerates
1-litre cans in boxes of 12.
5-litre cans in boxes of 4.
HOW TO USE IT
No dilution required: ready to use.
1.On a clean and dry surface, apply one even and continuous coat of FILAWET with a brush 2.After 24 hours repeat treatment in the same way.
3.For very absorbent materials, a third coat may be required to reach the desired wet effect.
diluted solutions of FILACLEANER. In the areas most exposed to weather conditions we recommend applying the product again every two years.
Do not apply the product externally if rain is forecast during the following 24 hours. Do not walk on floor while it’s drying: wait 24 hours after last product application. In the areas most exposed to weather conditions we recommend applying the product again every two years. Do not apply on terracotta floors or polished/very smooth surfaces. If product has been wrongly applied or if a thorough cleaning is required, remove FILAWET using FILANOPAINT STAR.
• Keep out of reach of children.
• Do not disperse into the environment after use.
• If used indoors, it is advisable to ventilate the area well.
• The use of a single-disc cleaning machine is permitted only if it is perfectly undamaged. Outdoor flooring must be properly laid before being treated and must satisfy all specific requirements, including: adequate sloping, properly executed expansion joints, perfect insulation from underlying ground, proven compatibility with sub-zero temperatures.
Storage temperature: from 0° to 30°C The product should be applied to materials with temperature between 5° and 30° C.
Synthetic resins dispersed in aromatic hydrocarbon solvent. Pursuant to It.Leg.Dec. No.161/06 class: Fixative primers (consolidator) EU limit value for this product (Cat: 1/h): 750 g/l (2010) This product contains no more than 739.20 g.