Wwet-look colour-enhancing protector

Add to wishlist

More on Brand


San Martino di Lupari, Italy
Contact the company
Name of product/article



Wwet-look colour-enhancing protector

FILAPT10 Water-based wet-look colour enhancing protector.
What It’s For
A colour-enhancing, water and oil repellent sealer that protects outdoor surfaces in terracotta, unpolished natural stone and agglomerates. 
It protects surfaces against stains and dirt and is therefore the ideal product for use near kitchens, barbecues and on driveways where cars are parked. 
It enhances surfaces, providing a wet look. 
It is a water-based product and so it is more environmentally friendly. 
It drastically reduces treatment time as it can be applied to surfaces still not completely dry. Highly resistant to light and heavy traffic. 
Weather resistant 
Treated surfaces are easier to clean. 
Does not alter terracotta frost resistance.
Materials to be treated
Unpolished stones and agglomerates
1 litre cans in boxes of 12. 
5-litre cans in boxes of 4.

Further info from manufacturer on FILAPT10
Further details
No dilution required: ready to use.
Shake before use. With the surface clean and dry, apply FILAPT10 evenly, using a large flat paintbrush, fleece applicator pad or roller, also working well into the grouting. As this is a waterbased product, it stands up to residual humidity and can therefore even be applied just a few days after initial washing.
Apply a second coat of the product 2-3 hours later following the same method. Wait at least 12 hours before walking on the surface.
Maintenance: diluted solution of FILACLEANER
For surfaces with low absorbency (slate, Botticino or Carrara marble) we recommend diluting the product with water (1:1 dilution). Do not use on polished surfaces. Do not apply the product externally if rain is forecast.
If product has been wrongly applied or if a thorough cleaning is required, remove FILAPT10 using FILANOPAINT STAR.
• Keep out of reach of children.
• Do not disperse into the environment after use.
Outdoor flooring must be properly laid before being treated and must satisfy all specific requirements, including: adequate sloping, properly executed expansion joints, perfect insulation from underlying ground, proven compatibility with sub-zero temperatures.
Storage temperature: from 5° to 30° C The product must be applied to material with a temperature of between 10° and 30°C.
Product with a base of emulsions and synthetic waxes.

You might also like...
Recently Viewed