Share

FritsJurgens SYSTEM3

Metal door hinge

  • Design by FritsJurgens

Get directly in touch with FritsJurgens

More on Brand

FritsJurgens

Slochteren, Netherlands
Overview
Name of product/article

SYSTEM3

Type

Metal door hinge

Materials

Metal

Design Year
2015

FritsJurgens System3 can turn through 360º and is characterised by a hold position at 0º, 90º, 180º and 270º. This means that the spring-loaded door turns from each 45º in both directions and stops in the desired direction. The door needs only a little force to start moving, then it continues to rotate by itself thanks to the patented spring construction. Thanks to precise damping the door comes to rest in the hold position after two movements.
FritsJurgens System3 is made from corrosion-resistant material and can be used with allFritsJurgens floor plates, top pivots and ceiling plates.

Further info from manufacturer on SYSTEM3
Further details
Functioning System3
DETAILED TECHNICAL SPECIFICATIONS
System3, three functions:
1. Revolving
2. Closing
3. Holding in position

Product descriptions:
tot 40 kg: MPDS-F9016
tot 70 kg: MPDS-F9020
tot 110 kg: MPDS-F9024
tot 200 kg: MPDS-F9028

Highly suitable for the following types of doors:
Doors with the hinge in the middle and swivel walls with a defined open and close position. Suitable for internal and external doors made from all types of material.

Maximum bearing capacity:
500kg

Minimum door thickness:
40 mm

Minimum dimensions around the door for fitting:
Below:
In the case of a floor plate for internal (VPR80-B01 RVS en VP 80*40-B11 RVS) use 13 mm.
In the case of galvanising of the floor plate 7 mm.
In the case of a floor plate for external (VP 82*52 B01 RVS) use 7 mm.
Above:
In the case of a round ceiling plate (PPR80-B01 RVS) 10 mm.
In the case of a square ceiling plate (PP 40*60-B11 RVS en PP 40*60-B9101) 4 mm.
Door/closing side:
In the case of a 40 mm door thickness 4 mm.
In the case of a 50 mm door thickness 5 mm.
In the case of a 60 mm door thickness 6 mm.
Based on a flat floor with square side walls. The rule of thumb for determining the pivot/closing side of the door is to divide the door thickness by 10.

Hold positions:
0º, 90º, 180º and 270º

Minimum distance from the pivot point to the side of the door:
The minimum distance from the pivot point of the hinge to the side of the door is 91 mm.

Maximum door dimensions:
Unrestricted up to a maximum weight of 500 kg. FritsJurgens guarantees the closure force up to a width of 1,500 mm from the pivot point and up to a weight of 200 kg. Wider and heavier doors are possible, but the closure force then reduces.

Special doors:
FritsJurgens System3 is suitable for soundproof doors, doors with draught-excluding, windproof and waterproof profiles, and burglar-resistant doors. For details of these doors please contact one of our dealers or partners in your area.

Floating floors/suspended ceilings:
It is possible to fit a pivot door if the floor plate or ceiling plate is connected to the structural subfloor or ceiling.

Packaging:
Delivered as a complete set with top pivot, floor plate, ceiling plate and fitting accessories.

Guarantee:
Two-year manufacturer’s guarantee.

You might also like...
Recently Viewed