System4, Four functions:
3. Holding in position
MPDS-M42-SC1000RHighly suitable for the following types of doors:
Doors positioned next to a wall and self-closing doors. Suitable for internal and external doors made from all types of material.
Maximum bearing capacity:
Minimum door thickness:
90º and -90º (also available without hold position).Closure force
EN 1154 – 3/5Closure speed
Minimum dimensions around the door for fitting:
In the case of a floor plate for internal (VPR80-B01 RVS en VP 80*40-B11 RVS) use 13 mm.
In the case of galvanising of the floor plate 7 mm.
In the case of a floor plate for external (VP 82*52 B01 RVS) use 7 mm.
In the case of a round ceiling plate (PPR80-B01 RVS) 10 mm.
In the case of a square ceiling plate (PP 40*60-B11 RVS en PP 40*60-B9101) 4 mm.
In the case of a 40 mm door thickness 4 mm.
In the case of a 50 mm door thickness 5 mm.
In the case of a 60 mm door thickness 6 mm.
Based on a flat floor with square side walls. The rule of thumb for determining the pivot/closing side of the door is to divide the door thickness by 10.
Minimum distance from the pivot point to the side of the door:
The minimum distance from the pivot point of the hinge to the side of the door is 91 mm.
Maximum door dimensions:
Unrestricted up to a maximum weight of 150 kg. FritsJurgens guarantees the closure force up to a width of 1,500 mm from the pivot point. Wider and heavier doors are possible, but the closure force then reduces.
FritsJurgens System4 is suitable for fire-resistant doors (System4 without hold position), soundproof doors, doors with draught-excluding, windproof and waterproof profiles, and burglar-resistant doors. For details of these doors please contact one of our dealers or partners in your area.
Floating floors / suspended ceilings:
It is possible to fit a pivot door if the floor plate or ceiling plate is connected to the structural subfloor or ceiling.
Delivered as a complete set with top pivot, floor plate, ceiling plate and fitting accessories.
Two-year manufacturer’s guarantee.