WP-repair is an emulsion wich penetrates into the pores and surfaces slits creating a waterproofing shield. It stops the absorption of the treated surfaces by creating a protective barrier against water, moisture, rain, frost. It is not a film-forming substance and it prevents efflorescence, moulds and saltpetre.
WHERE TO USE
For the treatment of cotto, gres, klinker, marble, concrete and similar floor. Specific to protct and restore balconies and terraces avoiding the floor demolition.
HOW TO USE
The surfaces to be treated must be clean, dry and without any part that is starting to separete. Any macroscopic slit (larger than 1 mm) must be filled with cement's filler. Smoothly apply the product on the surface with an even action and well filling gaps, slits and grouts. Apply a second coat to very absorbing surfaces after 24 hours from the previous coat. WP-repair doesn't penetrate ceramics or not absorbing materials; In that case remove the not absorbed product with a cloth, then after 3 days wash it with water and soap.
Approximately Lt 0.15 per square meter depending on the surface properties. 1 liter of WP-repair treats an average of 7 square meters.
Emulsion of synthetic resins