Glue and mastic
AS-acril High performance paste adhesive based on pure acrylic resins. Its elasticity and abutment power allows binding of porous or PVC materials, rubber or various resilient materials. It is ready to use, it retains its elasticity with aging and it is resistant to moulds and moisture. It can be used as sealing stucco (with smooth spatula).
WHERE TO USE
AS-acril is used for laying PVC flooring, polyurethane boards, synthetic or rubber coverings, linoleum, glass wool, PVC substrate carpets, polystyrene, cork; effective on any type of porous support, both vertical or horizontal (plaster, cement, ceramics, wood, etc.).
HOW TO USE
It must be used on clean, dry surfaces, without separating parts. Apply AS-acril uniformly on the surface with a 1.5÷3mm triangular toothed spatula. Then lay the covering and press it strongly pushing out any air bubbles. Slightly porous surfaces such as ceramics, marble and similar should be coarsened up and made porous before applying. AS-acril can be applied with a smooth spatula to seal cracks and slits.
Not for use on walking surfaces.
0.33 liters for each square meter of surface. 1 liter of AS-acril can be used for an average of 3 square meters of coverings.
Adhesive based on pure acrylic resins
Colour: Ivory White
Specific weight: 1,580