Share

Gattocel Italia PR_anti-mould

Mould-resistant primer

Get directly in touch with Gattocel Italia

More on Brand

Overview
Name of product/article

PR_anti-mould

Type

Mould-resistant primer

PR-antimuffa It smoothes the substrate increasing the abutment, the yield and the following treatments lifetime. Its action is time lasting avoiding and preventing moulds, efflorescence and paint separation effect. It is possible to increase the product efficiency changing the dilution concentration.
WHERE TO USE
PR-antimuffa allows an optimal preparation of the masonry surfaces even if deteriorated by moulds and similar too. It is for indoor and outdoor use, for old and new (for prevention use) surfaces both.
The treated surfaces will be ready for the following finishing treatments: water paints, quartzite, scraping pattern, finishing touch, etc.
PR-antimuffa can be used as antimould additive for water paints too.
HOW TO USE
Apply only to dry, coherent and clean surfaces. Water down 1 liter of PR-antimuffa with 12 liters. Apply by brush, roller or spray. When used as additive, add 0.75 liters of PR-antimuffa to 13÷15 liters of water paint.
YELD
Approximately 0.025 liters for square meter depending on the surface type. 1 liter of PR-antimuffa watered down with 12 liters treats about 40 square meters.
When used as additive, add 0.75 liters of PR-antimuffa to 13÷15 liters of water paint.
PHYSICAL CHARACTERISTICS
Concentrated emulsion of synthetic resins
Appearance: Dense liquid
Colour: White
Specific weight: 1,020

Further info from manufacturer on PR_anti-mould

Adhesion improvers, fixatives, primers Collection by Gattocel Italia
You might also like...
Recently Viewed