Share

Gattocel Italia PR_HP

Primer

Get directly in touch with Gattocel Italia

More on Brand

Overview
Name of product/article

PR_HP

Type

Primer

PR-HP is a concentrated emulsion based on extremely thin acrylic resins. It evens the surface absorption increasing the abutment, yield and following treatments lifetime (paints, finishing touch, chalky plasters, plasters, mortars and cementitious adhesives, etc.) It has an antimoisture counterthrust action that prevents efflorescence and separation effects.
WHERE TO USE
It allows the optimal preparation of internal and external masonry surfaces, both old or new.
Ideal on friable surfaces like chalky plasters, concrete, old paint, plasters and damp deteriorated walls. Specific for retaining walls, basements, damp rooms, old houses.
HOW TO USE
Apply only on clean and dry surfaces. Remove moulds, efflorescence, incoherent parts and any trace of previous treatments.
Water down 1 liter of PR-HP with 5 liters and brush or spray (low pressure). Apply one coat of the product starting from the upper side and saturating well the substrate. Apply a second coat after 3 hours only on very absorbing surfaces. After 6 hours the surfaces are ready for the next treatments.
YELD
1 liter of PRHP watered down with 5 liters treats an average of 25 square meters. Approximately 0.040 for square meter depending on the surface properties.
PHYSICAL CHARACTERISTICS
Concentrated emulsion of extremely thin acrylic resins
Appearance: Liquid
Colour: Translucent
Specific weight: 1,015

Further info from manufacturer on PR_HP

Adhesion improvers, fixatives, primers Collection by Gattocel Italia
You might also like...
Recently Viewed