Share

Gattocel Italia AD_latex

Screed and base layer for flooring

Get directly in touch with Gattocel Italia

More on Brand

Overview
Name of product/article

AD_latex

Type

Screed and base layer for flooring

AD-latex improve the cementitious mixture performances. It improves the homogeneity, compactness and adhesiveness. It improves the waterproofing and increase the mechanical strength to bending, weather and chemical agents. It increase the A/C proportion and leaves unchanged the breathability of the mortars mixed with the additive.
WHERE TO USE
It is specific for resumption of casting, tiling, leveling, screeds, hooking grouts, plasters, repairing, generic restoration, and in all the circumstances where high performances mortars are required.
HOW TO USE
Water down AD-latex with clean water depending on the application and add to the mixture in place of water.
Apply the mortar only to compact, clean and wet surfaces. Prepare with a hooking grout only in the case of resumption of casting. Cover the grout with the added mortar before drying, wet over wet.
WARNINGS
Do not use in mixtures where lime is the only binder. Avoid using in case of risk of frost or heavy rain in the 24 hours following the treatment.
YELD
0÷040 liters for each cubic meter of mixture to be added depending on the application purpose.
PHYSICAL CHARACTERISTICS
Synthetic resins in emulsion
Appearance: Fluid
Colour: White
Specific weight: 1,015

Further info from manufacturer on AD_latex

Additives for plasters and mortars Collection by Gattocel Italia
You might also like...
Recently Viewed