15% off until 2nd April. Use the code SPRING15

15% off until 2nd April. Use the code SPRING15



Wall-mounted laminated wood pergola

Get directly in touch with GIBUS

Retailers list

More on Brand


Saccolongo, Italy
Name of product/article
Wall-mounted laminated wood pergola
Laminated Wood
Design Year

Bearing structure in painted aluminium with wall attachment or ceiling attachment behind, placed on a supporting gutter 
pipe complete with legs and floor fixtures. Stainless steel brackets and painted cast aluminium. Folding fabric awning running on 130 mm painted aluminium guides, held by intermediate section profiles 43x65 mm, and terminal profile 65x85 
mm, in painted aluminium. Drive system on lateral guides and high-strength toothed belt, running on ball bearings. Cast 
aluminium casing with belt tension regulation. Nylon slide carriages with wheels with bearings and stainless steel pins. Patented Quick Block front aluminium bayonet intermediate section hooking system. Fabrics separated or partly separated, to slide onto the intermediate sections, joined by patented Weather Strip systems, which makes the fabric totally waterproof. 
Patented Fast Coupling motorised movement system standard, RTS or Homecontrol. With stretched cloth, the water discharge must be guaranteed. 

Laminar Scots pine wood with autoclave impregnation in class RAL 3 according to the
DIN 68800/3 standards. Wood painted with water-impregnated varnishes. Painted Aisi 304 stainless steel brackets and supports. Stainless steel bolts and screws.
Double-beam load-bearing structure, 150 or 200 x 60 mm, leaning on front 90 x 160 mm beam supported by posts. Fabric pitch awning supported by 43 x 65 mm windbreak support bar profile and by 85 x 65 mm load-bearing end, and slides on 46 x 85 mm lateral guides. Windbreak support bar, end and guides are made of painted aluminum. Transmission system on lateral guides with high-resistance timing belt, rotating on ball bearings. Manual or automated movement system.
Produced with: front gutter with downspout incorporated in the post and water drainage through the foot secured to the ground.
For projections greater than 600 cm, support beam (section 9 x 6 cm) positioned at about half the projection.
Possibility to customize beam ends.

Further info from manufacturer on MED COUNTRY ELITE

You might also like...
Recently Viewed