Wall-mounted motorized pergola
Bearing structure in painted aluminium with wall attachment or ceiling attachment behind, placed on a supporting gutter
pipe complete with legs and floor fixtures. Stainless steel brackets and painted cast aluminium. Folding fabric awning running on 130 mm painted aluminium guides, held by intermediate section profiles 43x65 mm, and terminal profile 65x85
mm, in painted aluminium. Drive system on lateral guides and high-strength toothed belt, running on ball bearings. Cast
aluminium casing with belt tension regulation. Nylon slide carriages with wheels with bearings and stainless steel pins. Patented Quick Block front aluminium bayonet intermediate section hooking system. Fabrics separated or partly separated, to slide onto the intermediate sections, joined by patented Weather Strip systems, which makes the fabric totally waterproof.
Patented Fast Coupling motorised movement system standard, RTS or Homecontrol. With stretched cloth, the water discharge must be guaranteed.
Shading structure comprising the awning in a box fixed to the wall or ceiling, and the fabric pulled along by side guides, to then rest on the legs joined by the front crosspiece measuring 100 x 60 mm.
The fabric is maintained perfectly taut by the gas springs inside the side guides and the Dyneema® cable transmissions.
The structure has motorised controls fitted standards. All the visible components are made in powder painted aluminium with stainless steel screws and fittings.
Guides fixed to the side ends of the front profile. The fabric is not secured to the side guides.
Unlike the Basic model, the fabric is secured to the side guides by a series of zips that run along a PVC profile. The series of stainless steel springs ensures perfect tension along both sides of the fabric.
Guides fixed beneath the front piece to enable adjusting the position in width, up to a maximum distance of 50 cm from the sides of the structure.