PASO DOBLE | Office desk
Rectangular executive desk
The desk tops consist of 30 or 35 mm thick coated panels; the edge of the 4 short sides is bevelled to 30°. The top may be covered either completely in leather or edged only; whenit is edged, an 8 mm thick insert is fixed in the central part, made of particleboard with black walnut veneer finish or a plate glass insert painted black on the lower surface.The supports for the tops consist of two double legs in solid polished black walnut, milled on the upper edges to allow a plate to be housed that is in turn fixed to the top. This plate comprises four spheroidal graphite cast iron“brackets” to which a steel bar is welded; a steel foot is fixed to the end of the two double legs and also acts as spacer between the same two legs. The two double legs are alsoconnected together by a stabilising steel bar, which also provides a further support for the desk top. All the abovementioned metal parts have a wrinkled black epoxy powdercoatedmetallic paint finish.The desks may be fitted with a modesty panel (optional) consisting of a 20 mm thick melamine-coated panel with a leather finish at the ends. The extensions are made from a 35 mm thick coated panel top bevelled on all 4 sides and fully covered in leather. This top is fixed on one side to thedesk leg by means of a steel plate with wrinkled black epoxy powder-coated metallic paint finish; it has a support on the other side, which may be either a single leg identicalto that of the desk or a drawer unit.