The MINI CIGAR ash tray consists of three elements. The first one is a steel EN10111DD11 bracket, T. 20/10 and 240x60 mm, which has two holes, Ø 5 mm, at a distance of 80 mm and 140 mm from the lower profile, in order to be fixed to a bin. On the upper part of the bracket there is a flattened fold which serves as clamp to hook the bin, whereas on the lower part there is a ring welded which contains the ashtray. The ring has a hole with a diameter of 12 mm on the left side and at 90 degrees. To the ring is fixed a screw attached to a M10 bolt, which is for safety and anti-theft. The second element is a pressed steel EN10111DD11 top, T. 20/10 Ø 100 mm H 53 mm, on which there are 4 holes with a diameter of 20 mm to drop the cigarette-ends in. On the upper part of the top there is a hole, Ø 53 mm, to which it is electro-welded a pierced printed concave sheet plate (Ø of the holes 3 mm), which also has a central opening with a diameter of 20 mm. On the lower part of the top is electro-welded a steel EN10111DD11 fascia, T. 12/10 H 50 mm, with a hole, Ø 12 mm, which coincides with the opening of the ring, useful to fix the bolt. The third element is the container made of a pressed steel EN10111DD11 sheet plate, T. 15/10. On the upper part of the container there is a border of 7 mm with a hole, Ø 12 mm, which makes easier the top entry. On the top of the tank there is a hole, Ø 5 mm, for drainage. All the elements are then cold galvanised and polyester powder coated.