The ONDA ashtray is made of steel EN10111DD11, T. 20/10. The upper part consists of a curved sheet plate and fixed to the main body through a continuous wire welding. On the frontal side is welded a pierced steel EN10111DD11 net at an inclination of 50 degrees, 180x H 120 mm, with holes with a diameter of 3 mm. On this net there are 5 laser cut openings, Ø 20 mm, under which a slot (dimensions 140x10 mm) serves to catch the ashes. The lower part is provided with a door, 220x H 500, where the hinges are obtained from the sheet plate of the bearing structure, fixing the M5 screws. Inside the ONDA ash tray is placed a galvanised steel EN10346DX51D+Z sheet plate, T. 0,8/10, provided with 2 oval holes 100x H 35. On the bottom of the ash tray there are four holes, Ø 10 mm, for eventual ground fixing through appropriate bolts. All the steel elements are then cold galvanised and polyester powder coated.