Share

LAB23 PUNKA C

Bench with Integrated Planter

Get directly in touch with LAB23

More on Brand

LAB23

Mira, Italy
Overview
Name of product/article

PUNKA C

Type

Bench with Integrated Planter

Materials

Galvanized Steel

The PUNKA C seat is made of galvanised and polyester powder coated steel EN10111DD1, T. 40/10. It consists of three elements: two of them are welded through a continuous wire welding and then polished, making the welding invisible. The first sheet plate is bent on 4 points with an angle of 90 degrees at 130 mm and 450 mm, while the second sheet plate is bent on the lower part of the first one and it has two folds of 21 degrees on the longer sides, thus creating the seat. The third element is placed on the seat through a foot 300 mm high, whilst though another foot, H 750 mm, it is fixed on the ground. Furthermore, the third element contains a bin made of galvanised and polyester powder coated steel EN10346DX51D+Z or brushed stainless steel AISI 304, T. 10/10, dimensions 300x300xh 690 mm. On the upper part with correspondence to a squared hole 250x250 mm, 2 bolts M4 are fixed to a frame in galvanised steel EN10346DX51D+Z, T. 10/10 and dimensions 250x250x H 20 mm. Ground fixing is possible thanks to six holes with a 10 mm Ø.

Further info from manufacturer on PUNKA C
Dimensions
Max dimensions:

H seat: 450 mm
H bin: 750 mm
Length: 2060 mm
Width: 500 mm
Width of the feet: 130 mm

You might also like...
Recently Viewed