The TOWN bin is made of galvanised and polyester powder coated steel sheet, T. 20/10, and provided with bin-liner holder. The cover, Ø 335 mmxH 35 mm, has a central hole, Ø 140 mm, with a 50 mm border. To the latter is welded a strong hinge, T. 30/10, fixed to the bin body through three rivets with a diameter of 5 mm. The bottom of the bin consists of a steel sheet, T. 10/10, with a padding 120 mm high and it is fixed to the bin body through an electro-welding. In the middle of the bottom there is a hole with a diameter of 8 mm in order to drain the rain. Two solid brackets, T. 30/10, are welded to the main body of the bin to fix it to the pale. The TOWN bin can be supplied with a pale as support. In this case the pale is made of galvanised steel, Ø 50 mm T. 2 mm and H 1200 mm, to which it is eventually fixed a rain cover made of galvanised steel as well, T. 25/10. On the bottom of the pale is welded a base plate with a diameter of 200 mm, provided with 3 M10 holes for the ground fixing with appropriate bolts (not included). All these elements are polyester powder coated.