The CIGAR S ash tray can be mounted on a wall or on a post. It consists of a laser cut shaped steel EN10111DD11 tube bar, 102x2 mm H 300 mm. On the upper part is fixed a pressed steel EN10111DD11 top through a continuous wire welding, H 60 mm and T. 2 mm. On the upper part of the top there is a hole Ø 54 mm, whilst four holes on its side are placed at a position of 90 degrees one from the other. Under the hole, Ø 54 mm, is electro-welded a pressed steel EN10111DD11 concave net, with openings 5 mm wide and a central hole with a 20 mm diameter. At a distance of 80 mm from the upper part of the ash tray, there is a laser cut shaped door with lighting, 100x H 250 mm, fixed to the tube bar with two hinges. On the lower and central part of the door there is a lock with universal triangular key in plastic. Inside the tube bar, at a height of 280 mm, is fixed a steel EN10111DD11 plate, T. 30/10, which serves as support for the cigarette-ends tank. The latter is in galvanised steel EN 10346DX51D+Z, T. 10/10, provided with a bottom made by a steel EN10111DD11 sheet padding, 10/10 thick. On the back side of the ash tray there are two holes, Ø 6 mm.