FREE SHIPPING THROUGHOUT EUROPE FOR PRODUCTS SHIPPED BY ARCHIPRODUCTS

FREE SHIPPING THROUGHOUT EUROPE FOR PRODUCTS SHIPPED BY ARCHIPRODUCTS

Share

LAB23 CIGAR

Steel ashtray

Get directly in touch with LAB23

More on Brand

LAB23

Mira, Italy
Overview
Name of product/article

CIGAR

Type

Steel ashtray

Materials

Steel

The ground support CIGAR ash tray consists of a steel EN10111DD11 laser cut shaped tube bar, 102x2 mm and H 900 mm. On the upper part is fixed a pressed steel EN10111DD11 top through a continuous wire welding, H 60 mm and T. 2 mm. On the upper part of the top there is a hole Ø 54 mm, whilst four holes on its side are placed at a position of 90 degrees one from the other. Under the hole, Ø 54 mm, there is electro-welded a steel EN10111DD11 pressed concave net, with openings 5 mm wide and a hole with a 20 mm diameter. At a distance of 80 mm from the upper part of the ash tray, there is a laser cut shaped door with lighting, 100x H 300 mm, fixed to the tube bar with two hinges. On the upper and central part of the door there is a lock with universal triangular key in plastic. Inside the tube bar, at a height of 390 mm, is fixed a steel EN10111DD11 plate, T. 30/10, which serves as support for the cigaretteends container in galvanised steel EN 10346DX51D+Z, T. 10/10, provided with a bottom made by a steel EN10111DD11 sheet padding, 10/10 thick. On the lower part of the tube bar, at a distance of 10 mm from the border, is fixed a steel EN10111DD11 plate, necessary for fixing the base. The base consists of a pressed steel EN10111DD11 plate, T. 30/10 H 30 mm. All the materials are then cold galvanised and polyester powder coated.

Further info from manufacturer on CIGAR
Dimensions
H: 990 mm
Ø tube: 102 mm
Ø base: 250 mm
H tank: 270 mm
Ø tank: 92 mm

You might also like...
Recently Viewed