Wooden Bench with back
The bench Wall is made of 4 load-bearing elements made in steel sheet (60/10 thickness), on which slats in wood or WPC, with section 90x22mm and length 2000mm shaping the seat and the backrest, are fixed. On each one of these elements, an armrest in steel sheet can be added. The number of armrests can therefore vary, from 1 to 4 armrests. For the fixing to the low wall (already present), there are 8 countersunk holes, 8,4 mm diam. For the use of specific bolts (not provided).
Steel EN10111DD11 is used for the realization of this product and all the elements in this material, after all the different stages (cutting, bending, welding), are treated with cataphoresis according to the UNI regulations and are later polyester powder-coated with AkzoNobel RAL colours at choice.
The wood used is either Iroko or Okume, treated with natural, water-repellent, UV ray resistant oils.
The WPC (Wood Plastic Composite) material is made of 70% recycled wood and 30% recycled plastic.