Galvanized plate garden vase
Material - Made of Corten steel of various thicknesses, laser cut, bent and welded they are ideal for furnishing terraces and classical gardens and modern of all sizes
the Corten is a set of alloys to carbon and stainless steel that allows the oxide to adhere to the surface but not of injuring it and deteriorate it. All products are custom built to mm to give the possibility to customers to realize ideas and projects according to their needs. The delivery of the processed cor-ten times can take a long time from 30 to 60 dd this to allow the aging process even if accelerated with acids and the like.
Drainage and adjustable feet - The base, always realized in stainless steel, is bolted to the planter body. It contains one or more drainage holes Ø 10 cm with a micro-welded network that stops any expanded clay from passing through. In the corners there are holes for housing the adjustable feet, from a minimum of 0 cm to a maximum of 5 cm (with standard feet) to allow the alignment also on uneven floors. Alternatively you can install wheels in vulcanized rubber of various sizes and seals to enable easy handling.
Insulation - A closed cell foam panel, thickness 17 mm, is applied to the sides of the planters that isolates the roots of the plants from contact with the sheet preventing any damage in case of extreme weather conditions such as intense heat and ice.
Filling - Martin Design planters are suitable for universal soil. At the base put a 3/4cm layer of expanded clay grains on which a non-woven fabric or Enkadrain is then placed and then proceed to fill with planter soil.
Caution - With the first watering there is the possibility of a leakage of dirty water due to contact with the soil, this could then spill onto the surrounding flour. If it is not cleaned immediately it will have to be cleaned a brush and specific cleaning products.