Stainless steel plant pot
Material - Martin Design planters are made of polished or brushed stainless steel of various thicknesses, laser cut, bent, welded and finally brushed or polished.They are ideal for furnishing hotels, public places and restaurants etc. Delivery times can vary from 7 to 30 working days depending on the production situation of the factory. The company and the staff are young and dynamic and give its customers the opportunity to realize personalized ideas and projects thanks to its 40 years of experience in sheet metal working as well as being equipped with the most modern machinery for the production of manufactured goods.
Drainage and adjustable feet - The base, always realized in stainless steel, is bolted to the planter body. It contains one or more drainage holes Ø 10 cm with a micro-welded network that stops any expanded clay from passing through. In the corners there are holes for housing the adjustable feet , from a minimum of 0 cm to a maximum of 5 cm (with standard feet) to allow the alignment also on uneven floors. Alternatively you can install wheels in vulcanized rubber of various sizes and seals to enable easy handling.
Insulation - A closed cell foam panel, thickness 17 mm, is applied to the sides of the planters that isolates the roots of the plants from contact with the sheet preventing any damage in case of extreme weather conditions such as intense heat and ice.
Filling - Martin Design planters are suitable for universal soil. At the base put a 3/4cm layer of expanded clay grains on which a non-woven fabric or Enkadrain is then placed and then proceed to fill with planter soil.
Caution - With the first watering there is the possibility of a leakage of dirty water due to contact with the soil, this could then spill onto the surrounding flour. If it is not cleaned immediately it will have to be cleaned a brush and specific cleaning products.