Sewer pipe and component
PE 100 and PE 80 high density polyethylene pipes for the distribution of fluids under pressure and fuel gas
The piping range "POLIETILENETUBI"produced by NUPI INDUSTRIE ITALIANEmainly includes PE 100 NADIR and NUPIGAS (PE80 and PE100) .
PE 100 NADIR pipe is in compliance with the regulations in force UNI EN 12201 and ISO 4427 for the distribution of fluids under pressure. In particular, it is suitable for conveying water for human consumption because it conforms to the Ministerial Decree No. 174 of 2004, to the provisions of Decree Law No. 31 of February 2001 (and subsequent Legislative Decree No.27 of February 2002) and, as regards the organoleptic characteristics of the water transported, is in compliance with UNI EN 1622 standard. PE 100 NADIR also meets the requirements of the current UNI EN ISO 15494 standard for the transport of industrial fluids.
NUPIGAS (PE80 and PE100) pipe complies with the requirements of the current UNI EN 1555 and ISO 4437 standards for the supply of gaseous fuels and the requirements of Ministerial Decree of 16-17/04/2008, the latter two decrees replace previous legislation (Ministerial Decree 11/99 and 12/85).
Low density polyethylene pipes for the transport of fluids under pressureNUPIPRESS pipe complies with the requirements of the current UNI 7990 standard for the transport of fluids under pressure (non-continuous operating conditions). Applications under pressure such as water supply, fire fighting networks, sewerage (covered by EN 12201 standard) and industrial use (covered by UNI EN ISO 15494 standard) are excluded. They cannot be used also in installations where the operating conditions are not constantly under pressure.
High density polyethylene pipes for civil and industrial sewerage and non-pressure underground drainage NUPI FOGNATURE pipes comply with the requirements of the current UNI EN 12 666 standard for the transport of fluids not under pressure.