Share

PLEXIFORM REMO

LED direct-indirect light aluminium pendant lamp

Get directly in touch with PLEXIFORM

Retailers list
Add to wishlist

More on Brand

PLEXIFORM

Liscate, Italy
Contact the company
Overview
Name of product/article

REMO

Type

LED direct-indirect light aluminium pendant lamp

Materials

Aluminium

Designers
Design Year
2017

LED suspended luminaire for indirect, direct or direct/indirect light emission. Formed by very thin, only 4 mm, asymmetrical aluminium body similar to an oar. In the indirect light version the body is a full and smooth solid also in the lower part. In the direct and direct/indirect versions, the lower part of the body has a precisely engineering incision where an opal polycarbonate diffuser is located to provide protection to the LED boards. The luminaire is really versatile and especially recommended for the in-line configuration with linear and angle joints allowing to combine the asymmetrical sides of the body, moreover the polycarbonate flexible joints allow a tilted installation of the fittings on the horizontal axis (max. 20°). On board driver.

FINISHINGS: Matt black, matt white, matt grey, polished aluminium. Epoxy powder coating, machined polished.

MATERIALS:
Aluminium body, lower opal polycarbonate diffuser and upper transparent (direct/indirect version) or satinated (indirect light emission) polycarbonate diffuser. Aluminium angle joints to fix to the fitting with transparent, flexible linear joints.

MOUNTING: Suspended luminaire, in-line installation is possible (max. 1500W) with linear and angle joints. Flexible joints allow a tilted installation of the fittings on the horizontal axis (max. 20°).

SOURCE:
Middle power LED boards, 220-240V. LED boards available in 3000K and 4000K CCT. CRI =80, MacAdam 3, nominal efficiency up to 100 lm/W.

POWER SUPPLY:
220-240V, on board driver, through wiring line 3x1,5 mm².

LIGHT EMISSION: Direct, indirect and direct/indirect versions. Diffused, uniform and smooth light emission. Dual emission version with 52% direct and 48% indirect light.

Further details
LINEAR JOINT
Flexible linear joint
RM801 50 x 40 x 1 mm

Polycarbonate flexible joint. Fixed with screws. Designed to create a flexible linear and tilted installation of the fittings on the horizontal axis (max. 20°).
ANGLE JOINT
Slim angle joint (90°)
RM802XX 137 x 140 x 4 mm


Powder coated or polished aluminium joint. Fixed with screws. Designed to create a 90° joint between two fittings in the strict side. Polycarbonate flexible joints, included.
Large angle joint (90°)
RM803XX 243 x 220 x 4 mm


Powder coated or polished aluminium joint. Fixed with screws. Designed to create a 90° joint between two fittings in the large side. Polycarbonate flexible joints, included.
Slim angle joint (30°)
RM804XX 82 x 136 x 4 mm

Powder coated or polished aluminium joint. Fixed with screws. Designed to create a 30° joint between two fittings in the strict side. Polycarbonate flexible joints, included.
Large angle joint (30°)
RM805XX 138 x 256 x 4 mm


Powder coated or polished aluminium joint. Fixed with screws. Designed to create a 30° joint between two fittings in the large side. Polycarbonate flexible joints, included.
CEILING ROSE WITH SUPPLY CABLE
Ceiling rose with supply cable
SV973XX 40 x 40 x 30 mm (cavo/cable 3x1,5 mm² x L. 1500 mm)
SV974XX 40 x 40 x 30 mm (cavo/cable 5x1,5 mm² x L. 1500 mm)

Electrical cable 3x1,5 mm2 or 5x1,5 mm2 and powder coated or chrome steel sheet ceiling rose. It makes possible the modules electrical supply.
Dimensions
mm 1423 x 242 x 27
Dimensions REMO

You might also like...
Recently Viewed