QUAD | Pendant lamp
LED pendant lamp
LED or fluorescent suspended, wall or ceiling luminaire with direct or direct/indirect light emission. Consisting of an elongated, clean, linear extruded aluminium body with die-cast aluminium end caps. Optics or diffusers available as accessories, to be ordered separately. The instantly recognisable U-shaped end caps are characteristic of this luminaire and make it a best-seller in the Plexiform family range. In-line, LED seamless configurations are also possible. On board driver.
FINISHINGS Matt black, matt white, matt grey. Epoxy powder coating.
MATERIALS Extruded aluminium body, die-cast aluminium end caps. Available as accessories: clear polycarbonate microprismatic diffuser (LED versions only), opal polycarbonate diffuser, aluminium antireflection optic (combined with microprismatic diffuser in LED versions).
MOUNTING Suspended, ceiling, wall installation. In-line configurations are also possible (max. 1500W) using linear and angle joints (seamless emission for LED version only).
ENVIRONMENTS By installing specific accessories excellent visual comfort, low luminance and low glare factor (UGR<19 and UGR<22 based on accessory and light source) can be achieved, making the luminaire suitable for VDU workstations. The product may be installed in workplaces, offices and halls, as well as in entrance and reception areas. The wall-mounted version is suitable for installation in transit areas, corridors and confined spaces.
LIGHT EMISSION Direct or direct/indirect, diffused light. Direct/indirect version, with antireflection optic as accessory, provides low glare emission (UGR<19) with a luminance <3000 cd/m² above 65° in every direction.
LED or fluorescent fitting for indoor use. Direct light or, only for fluorescent fittings single lamp and twin lamps, direct/indirect light (bi-emission). Ceiling, suspension or wall mounted.
It allows the creation of a continuous line utilising linear and angle joints.
Extruded aluminium body with die-cast aluminium end caps. Baked with epoxy powder coatings, resistant to damp
environments and UV-ray stabilized. Supplied with electronic driver or ballast, wiring with line.
Our LED, series 5630, are powered by constant current drivers, efficiency 125 lm/W Ra≥80, beam angle 120° in CCT 3000K and 4000K versions. The optic version attains UGR <19 and can be used with VDU’s. Product complies with current EN 60598 electric safety standards and EN 55015, EN 61000, EN 61547 electro-magnetic compatibility standards, and EN 62031, EN 62471photobiological safety standards and following amendments.
Product complies to RoHS standards.
Wiring with dimmable or DALI driver.
Bespoke colours, bespoke measurements