PLURA THERMO AD MINERAL
Self-protected membrane with slate granules
Prefabricated thermal activated composite waterproofing membrane, composed of distilled bitumen and special synthesis polymers, which provide thermal adhesion properties to the lower face waterproofing compound.
The waterproofing compound of the upper face allows for fast heat transmission to the lower face.
The thermal activated waterproofing compound allows the product to be positioned and applied without the initial use of heat and is particularly indicated for those surfaces where the use of direct open flame is not suggested. PLURA THERMO ADHESIVE MINERAL was developed for sloped roofs and for use under roof tiles directly on the substrate or heat sensitive insulation.
PLURA THERMO ADHESIVE MINERAL has a rot proof composite woven non woven single strand polyester, with high mechanical characteristics.
The upper face is self protected with mineral slates which reduce superficial heat absorption, improving the durability of the membrane. A side & head selvedge of respectively 10 & 15 cm are provided to improve adhesion and water tightness between the sheets. The lower face is provided with a thermoplastic removable film.
1 Silicon release film
2 Thermal activated mass
3 Woven non woven single strand composite polyester reinforcement
4 Mass which promotes fast heat transmission
5 Self-protected mineral surface
6 Release film side selvedge