Ductable terminals for recessed horizontal or vertical installation
• Structure: load-bearing, in galvanised sheet steel for horizontal installation in a false ceiling or vertical recessed wall installation, complete with naturally condensation drain pan, flanges to couple with the inlet/outlet duct. Pan is removable from the bottom. Filter supplied separately from the unit.
• Heat exchanger: with finned coil and electrical box for terminal block with left-right connections, which can be switched directly on site. Coil is removable from the bottom.
• Double inlet centrifugal fan with directly coupled 3-speed motor. Fan unit is removable from the bottom.
CXP - Recessed unit for horizontal or vertical installation (with lower inlet and upper outlet).
Number of rows
3 Rows - Unit with 3-row coil; unit for horizontal/vertical recessed installation.
4 Rows - Unit with 4-row coil; unit for horizontal/vertical recessed installation.
5 Rows - Unit with 5-row coil (only models 250, 300); unit for horizontal/vertical recessed installation.
➔ Additional water heating coil (1 row) for 4T-KBAA 4-pipe systems - only for 3R units with a 3-row coil.
➔ External plenum with additional water heating coil for 4-pipe systems (PBAB).
➔ ON/OFF 2-way valves for 2 and 4-pipe-systems.
➔ On/OFF 3-way valves for 2 and 4-pipe-systems.
➔ Auxiliary condensation drain pan.
➔ Frame with filter that can be extracted in any direction (efficiency rating G1/G2/G3).
➔ Straight outlet and inlet connection.
➔ 90° outlet and inlet connection.
➔ Flange for connection to duct.
➔ Anti-vibration connection for connection to the inlet/outlet duct.
➔ Panel with circular nozzles to be connected to the outlet/inlet connections.