Polyethylene thermal insulation panel

Add to wishlist

More on Brand


Torgiano, Italy
Contact the company
Name of product/article



Polyethylene thermal insulation panel


Aluminium, Polyethylene (PE)

THERMOLIVING®3B is a floor insulation material providing an excellent reduction in the footstep noise. It consists of three layers of air bubble polyethylene externally covered by two metallized films.
Each layer features transverse and longitudinal weldings that increase the life of the acoustic product performance by enhancing the mass-spring effect (S.A.M.E. International Patent).
The three layers are interconnected in a specific way, in order to avoid the superimposition of the welding lines, thus assuring the integrity of at least two layers of air bubbles over the whole surface.
S.A.M.E. provides all the necessary installation accessories: pre-folded adhesive perimetric stripes and joining tape. THERMOLIVING®3B does not require the installation of further vapour barriers, because it is completely waterproof.
This product can be installed in rooms or buildings with a floor heating system, thus supporting and increasing the performance of the related insulating system and it has the advantage of reaching excellent acoustic results that are impossible to obtain with the panels generally used in such systems. The reflective effect is obtained, in this case, in the inner air chamber of the insulating material.
Another positive aspect of THERMOLIVING®3B is the simple installation, because the product can be easily cut with a cutter. The remnants can be used by joining them with the adhesive tape to assure the coherence of the insulating performance.
The company provides assistance with the first installation.

Further info from manufacturer on THERMOLIVING® 3B

You might also like...
Recently Viewed