Lifting bath tub VRA10 with electric height adjustment, operation via panel.
Specification of services:
Tub body made of fibreglass strengthened polyester with gel coat coating.
Handholds for secure tub entry and exit.
The tub filling, which is operated via panel, is done automatically until the fill level has been reached. This fill level is pre-defined by the fill level monitoring unit. However, it is possible to stop the filling manually at any time. Temperature adjustment via thermostat with an integrated scald protection system for the tub and the shower head.
Digital water temperature display, integrated into the panel. The tub filling may be controlled via panel.
Shower head, 2100 mm long, with a white hose and a self-closing valve. Drain and overflow set.
Lifting of the tub is operated via panel. Two electric actuators.
Accumulator for a possible emergency operation in case of power failure.
Standardized magnetic valves, standard fittings and armatures.
The bath tub is available in various colours.
Injector disinfection (optional):
The disinfection unit has to be operated by the hand shower head.
The disinfection unit also includes a 2000 mm long hose, which is red, and an automatic closing valve.
The disinfectant is supplied by an injector and a flow rate meter, whereby the flow rate may be adjusted.
The disinfection unit is pre-configured for using commercially available 5 litre bins.
Hydromassage with 2 jets (optional):
Patented jet system without hoses or ducts. The unit is disinfectable and the draining is done automatically.
Two massage jets are integrated in the foot of the bath tub. They may be controlled by the panel.
The massage jets can be adjusted individually, in order to set the jet direction.
Built-in shampoo- and bath oil dispenser.
The dosing pumps are controlled by the keypad.