FREE SHIPPING THROUGHOUT EUROPE FOR PRODUCTS SHIPPED BY ARCHIPRODUCTS

FREE SHIPPING THROUGHOUT EUROPE FOR PRODUCTS SHIPPED BY ARCHIPRODUCTS

Share

Schüco PWS Italia Schüco ThermoSlide

PVC patio door

Get directly in touch with Schüco PWS Italia

More on Brand

Schüco PWS Italia

Paliano, Italy
Overview
Name of product/article

Schüco ThermoSlide

Type

PVC patio door

Materials

PVC

The Schüco ThermoSlide PVC-U lift-and-slide door system is based on the 82 mm Schüco Corona SI 82 system, in which the frame has a system basic depth of 219 mm. The triple thermally broken lift-and-slide threshold and the thermally broken frame reinforcement achieve excellent thermal insulation and isothermal flows. This is supported by the frame profile enclosing the vent frame.

- RAL tested system
- Wall thicknesses in accordance with RAL-GZ/716 and DIN EN 12608 Class A
- Fully recyclable
- The continuous 219 mm outer frame in which the vent frame runs guarantees maximum operational reliability
- Vent weights up to 400 kg possible
- Easy to operate even with greater vent weights
- All the gaskets are made of EPDM rubber and are characterised by their excellent recovery properties and permanent elasticity
- Innovative gasket geometries with wide surfaces

Further details
Energy

- Maximum thermal insulation with an average Uf value of 1.1 W/(m²K), in conjunction with appropriate glazing (Ug ≤ 0.6 W/m²K) and with conventional dimensions for lift-and-slide doors, produces Uw values of ≤ 0.8 W/m²K
- 82 mm vent frame with 5 chambers
- 219 mm outer frame profile with 7 chambers
- Triple thermally broken, flat aluminium threshold
- Thermally broken outer frame reinforcement
- Vent rebate with co-extruded gasket lip
- Glazing up to 52 mm possible
- Multi-chamber cover profile
- Three sealing levels in the centre section (with integrated anti-friction gasket)
- Glazing bead height of 23 mm for increased glass edge cover

Security

- Perfectly sized reinforcing profiles in the vent frame ensure maximum stability and durability
- Four screw ports in the thermally broken aluminium reinforcements and the threshold ensure a high level of resistance to torsion in the frame
- A version to RC 2 is also available for increased security requirements (testing in spring 2014)

Comfort

- Narrow face widths ensure maximum light penetration
- Excellent sound reduction values
- Easy to install due to outer frame and threshold connectors

Design

- Face widths of 174 mm at the sides and top and 144 mm in the lower area of the threshold profile
- Clean lines due to large cover profile and vent frame overlap
- Flat aluminium threshold
- In the case of type 01, aluminium cover caps are available for integration in aluminium façades
- Exclusive metallic design can be achieved with the Schüco AutomotiveFinish surface finish design
- Profiles can be coloured with a large selection of woodgrains and single solour decorative foils


You might also like...
Recently Viewed