Pipe for air conditioning unit and for domestic gas network

Get directly in touch with SCTUBES

Retailers list

More on Brand


Florence, Italy
Contact the company
Name of product/article



Pipe for air conditioning unit and for domestic gas network



Air conditioning
Transportation of refrigerant gases

SMISOL® Clim is a result of close customer-manufacturer cooperation, meeting the needs of an increasingly demanding market asking technological solutions able to fully meet the technical specifications required by the air conditioning sector, while maintaining a good quality/price ratio.
This copper tube is manufactured according to EN 12735-1, and is pre-insulated with expanded closed cell polyethylene in accordance with EN 14114 and it is distributed in coils of 50 m. The dimensions are defined in inches and as expressly indicated by EN 12735- 1, in section 6.3.2, they may be agreed between manufacturer and customer.
SMISOL® Clim is also characterised by particularly low eccentricity values, a very important feature for flaring operations.

Further info from manufacturer on SMISOL® Clim
Further details
Internal surface
The inner surface of the copper tube is bright, clean and dry, essential characteristics of this product category normally available on the market for industrial use. This particularity allows for the achievement of an integrated system with the terminal units of the plant.
The particular internal factory cleanliness of SMISOL®Clim is safeguarded by fitting terminal sealing stoppers at production.
External protection
Polyethylene closed cell expanded foam with average water vapour diffusion resistance factor “μ” equal to 10000.
The insulating sheath has class 1 fire resistance compliant to Italian Min. Decree 26/06/84 and is manufactured under full compliance to European Regulation EEC/EU 2037/2000 which enforces the use of expanded foam insulation sheaths devoid of CFCs and HCFCs which are harmful to health and the environment.
Eccentricity defines the distance between the centre of the outer circumference and that of the inner circumference and it is a fundamental parameter for flaring operations. Eccentrity is zero when the two centres coincide perfectly (Fig. 1), while in the presence
of eccentricity, the greater its value, the more variation is evident in the wall thickness (fig. 2).
Sheath characteristics
Thermal conductivity: λ≤ 0,040 W/m°C.
Average value of the water vapour diffusion resistance factor “μ” 10000.
Average sheath density: 33 kg/m³.
Free of ammonia residues.
Class 1 non flammable (Italian Min. Decree 26/06/84).
Free of CFCs and HCFCs (Reg. EEC/EU 2037/2000)

You might also like...
Recently Viewed