The life line Securope® is an anchoring device that employs a flexible anchor line and structures suitable for roofs with low or poor bearing capacity, thanks to its deformability that allows to dissipate the energy generated by a fall.
SecuropeR was constructed for installation on metal roofs (minimum thickness 6/10 for steel and 10/10 for aluminium).
Thanks to its special support plates which fasten via self-tapping screws and an adhesive sheath that restores roof waterproofness. It can also be mounted with special clamps adapted to the main types of roofing sheets that allow the installation of the life line without creating holes.
The small size of system components and its adaptability make the SecuropeR line especially useful on buildings of historical and architectural value or on non linear paths, like for example the interior cornices of churches.
Fixed and middle components can be mounted directly onto concrete or steel structures and, in the event of falls, middle components deform mechanically, absorbing part of the loads that would otherwise be transmitted to the structure. An authorised maintenance worker will verify system integrity and will restore components that have intervened.
The system can be used simultaneously by 4 operators and complies with the technical standard EN 795:2012
Type C and the technical specification CE/TS 16415:2013.
Covered by a warranty of 10 years and must undergo an annual maintenance service.