Roof in curved plastic laminate element

Add to wishlist

More on Brand


Rome, Italy
Contact the company
Name of product/article



Roof in curved plastic laminate element

Design Year

Roof in curved plastic laminate element.
Assembling the panels must be done with joists with a maximum distance of 90 centimeters. 
Place the first plate with the side marked facing the outside of the cover. After having aligned, fix on the first tile at the support structure.
Caution: the hole in the plate should be 10 mm, with the stem of the screw of 6,5 mm, to allow the normal thermal expansion.
Then perform the second fixing of the joist more upstream. Place laterally the second plate over the first and secure the bottom at the overlap. To maintain the alignment of the hardware we recommend using a wire as a reference, fixed at the ends of the joist. Proceed in the same way with the plates, until the end. If necessary, adapt the last plate with an abrasive disc.

Further info from manufacturer on LaRomana®

You might also like...
Recently Viewed