15% off until 2nd April. Use the code SPRING15

15% off until 2nd April. Use the code SPRING15

Share

TREND GroupSHINING

Glass Mosaic

Get directly in touch with TREND Group

Retailers list

More on Brand

TREND Group

Vicenza, Italy
Overview
Name of product/article
SHINING
Type
Glass Mosaic
Materials

These semi-transparent glass mosaic tesserae are coloured in fusion, with an iridescent effect. The production process is the same as for Vitreo mosaic, although the iridescent effect is obtained through the addition of semi-precious metals to the molten glass.
The iridescent effect is permanent and is not affected by chemical agents, temperature changes or frequent use.
Made using up to 59% post-consumer recycled glass.

Further info from manufacturer on SHINING
Further details
Technical information
- Format size 2 x 2 cm • 1 x 1 cm. 

- Thickness ~ 4 mm. 

- Weaving, flared and chamfered
tesserae are available in sheets
of 31.6 x 31.6 cm. 

- Joint ~ 1 mm.

- Tiles are pre-mounted on TREND PLUS. 


Benefits
Iridescence is obtained by working with molten glass, so there will never be problems of peeling; this can be the case where the effect is achieved by films bonded to the exposed surface.

The type of treatment applied to Shining gives the product a special metallic effect, with distinctive tone-on tone colouring. The iridescent effect is not affected by water, so the tesserae can be used in solid colour mosaics or mixed blends, in swimming pools or other wet areas.
Applications
Shining mosaics can be laid on the floor or vertically on interior and exterior surfaces. Tiles can be used in contact with water, for applications such as shower trays or swimming pools. Due to the size of the tesserae (2 x 2 cm) and the frequency of joints (1 mm), the mosaic surface is inherently slip-resistant. 

The waterproof characteristics of this mosaic does not preclude waterproofing of the foundation substrate for swimming pools and similar applications.

You might also like...
Recently Viewed