TREND SURFACES | Wall/floor tiles

Indoor marble grit wall/floor tiles

Add to wishlist

More on Brand


Vicenza, Italy
Contact the company
Name of product/article

SURFACES | Wall/floor tiles


Indoor marble grit wall/floor tiles


Marble Grit

Composite of granules selected industrially and created in a large commercial slab with a maximum size of 300 x 120 cm, a nominal thickness of 6.6 mm and a weight of approximately 14kg/m2. It is obtained through vibro-compression and consists of about 93% selected granules of various types such as post-consumer recycled glass, recycled pre-consumer porcelain, glass mosaic, quartz, granite, mixed together, in different sizes, with a minimum quantity of polyester resin and coloured powder pigments.
Made using up to 78% post-consumer recycled glass.

Further info from manufacturer on SURFACES | Wall/floor tiles
Further details
Technical information
- Thickness ~ 6,6 mm.

- Weight 14 kg/m2.
- Dimensions 29,85 x 29,85 cm • 60 x 29,85 cm • 60 x 60 cm • 99 x 14,7 cm • 120 x 60 cm • 120 x 120 cm • 300 x 60 cm • 300 x 120 cm.

The large 300 x 120 cm format enables covering large areas with relatively few joints.

The lightness of the material, combined with its outstanding technical properties, allows for a variety of uses, especially in those environments where weight is critical, like apartments, ships and partition walls.
It is easy to cut on site, using the correct diamond cutting disc, and is sufficiently flexible to attain a radius or more than 70 cm, so is suitable for cladding curved surfaces.
The agglomerate’s slim dimensions enable it to be used on top of existing surface materials.
This agglomerate is suitable for wall cladding and flooring, even in areas with continuous traffic, both indoors and outdoors. 
Using WATER-JET cutting, personalized designs or inserts can be created, or standard sizes cut so that sheets can be laid side by side, creating an effect of continuity.
It is also suitable for covering steps, raised floors and baseboards, as well as contouring around curved surfaces like columns.
For cladding surfaces such as tables and countertops, the Skin method is recommended, which provides for the application of a wooden support and assists with the creation of finished borders and seamless bonding to hide the joints.
Bim and Cad
Materials & Textures

You might also like...
Recently Viewed
Download BIM/CAD