Adhesive strip for joint
JOINT SEAL WÜTOP ® FLEX WURTH
One-sided, self-adhesive, profiled aluminium roll for durable and secure sealing of typical roof junctions.
Ideal alternative to sheet metal and lead flashing.
Material adapts perfectly to roof surface:
The embossed surface structure allows it to be moulded to the roof and easily bent in any direction.
Problem-free drainage of water.
Ensured by almost flat surface.
No harmful heavy metals such as lead.
UV and weather-resistant.
Paint-coated surface allows optimum adaptation to the respective tile.
Permanently elastic, temperature-resistant butyl adhesive with high adhesive strength on almost all substrates.
Cut WÜTOP Flex to the required length using scissors. Roughly fit the material to the shape of the roof and pull the cover film off the adhesive coating on the back. Firmly press onto the tiles and smooth down into the trough. WÜTOP Flex sections can also be overlapped. Ensure that overlapping sections are adhered and pressed down very carefully, especially in corner areas. We recommend using a rubberised pressure roller for pressing down the product. If WÜTOP Flex is run up onto building components (e.g. chimneys), the upper edge must be fitted with a conventional cap strip and sealed with a permanently elastic sealant.
To ensure good, lasting adhesion, note the following:
Processing temperature from +5°C;
The substrate must be clean, dry and free from dust and grease;
Mould WÜTOP Flex exactly to the contours of the surface and press down firmly;
Conduct your own adhesion tests on tiles with silicone coatings.