High-quality and safe insulating and filling of window joints, window sill joints, pipe openings, joints, wall joints, wall openings and cavities. Colour provides visual confirmation of installation.
InstructionsShake can vigorously 20 times before use. The surfaces must be clean, solid and free from dust and grease. Prime highly absorbent surfaces. Adhesion surfaces must be moistened with water before the foam is applied. Moisten again if several foam beads are applied. Screw the can all the way into the gun support – do not screw too far or tilt. Foam continues to expand after application. Immediately remove splashes of foam with PURlogic Clean, art. no. 0892 160. Thoroughly clean the gun and valve after use. Always leave the open can screwed onto the gun. The contents of the can must be used within 4 weeks.
The gun foam can be used for a variety of applications.
Small can, high yield.
Up to 40 litres of foam from an easy-to-use and handy can.
Suitable for use in winter.
Can also be applied at surface and ambient temperatures down to -5°C.
Tested product characteristics.
Joint sound insulation: Reduces noise level (RST,w = 61 dB in accordance with DIN 52210).
Thermal conductivity: Reduces heat loss in accordance with DIN 52612.
Air permeability: Prevents draughts, tested in accordance with EN 1026.
Water vapour permeability: Tested in accordance with DIN EN ISO 12572.
Energy saving according to German Energy Saving Ordinance (EnEV): Heating cost savings of 6%, based on DIN 18055/EN 204.
General test certificate issued by construction authorities: Complies with building material class B2 in accordance with DIN 4102, Part 1.
Fine-celled and uniform foam structure.
Silicone- and solvent-free.
Resistant to ageing.
Notice"Light ivory" colour is ideally suited for renovating old buildings.
Adheres to concrete, stone, hard PVC, metal and wood. Does not adhere to polyethylene, silicone, PTFE and grease. Unhardened foam must not come into contact with wet adhesive.