Bondseal kd grey 300ml
Glue and mastic
STRUCTURAL ADHESIVE BOND+SEAL WURTH
Elastic PU adhesive and sealant for a broad range of uses
Outstanding adhesive strength on a wide range of materials and surfaces.
Approved for use with foodstuffs (ISEGA certificate)
Harmless to health in hardened state
Suitable for gluing and sealing in food processing areas
Bonding of identical and different substances possible
Compensation of different material expansions
Absorbs vibrations and sounds
Long skin formation time
Allows bonding or sealing of complex components
Also ideal for large surfaces
Assembly components can be repositioned
Can be ground/painted
Following skin formation, can be mechanically machined and painted over without surface activation (perform preliminary tests to check paint compatibility).
Avoids corroding the metal
Do not allow this product to come into contact with alkyd-resin paint systems. Not suitable for glass groove sealing.
Direct sunlight may result in yellowing of the surface. Not suitable for PE, PP, PTFE, silicone, polystyrene and plastics. Minimum adhesive thickness: 3 mm. It is essential to use Würth B+S Adhesion Plus products in order to achieve optimum adhesion results. Unhardened material can be removed with B+S remover, art. no. 089010063; hardened material can only be removed mechanically.
The above application instructions are recommendations given on the basis of our own tests and experience. We recommend that you carry out your own tests before use. Due to the great variety of different applications and storage and processing conditions, we cannot guarantee a particular application result. We will not accept legal liability for any advice or technical information provided by our free customer hotline unless this advisory service and/or technical information is part of the contractually agreed performance owed by us, or the customer service employee acted willfully or intentionally. We guarantee the consistent quality of our products and reserve the right to make technical changes and improvements.
For a wide range of bonding and sealing work on surface materials such as metal, painted surfaces, wood, stone, concrete and plastic (polyester and hard PVC).
The surfaces must be clean, dry and free from dust and grease.