H 28-MLS POWER
Extremely powerful hammer drill with active vibration damping. Making it ideal for series drilling.
Extremely rapid drilling progress
Due to the low vibrations, the machine can be used for a long period with no signs of fatigue.
Interchangeable drill chuck for versatile applications
The machine can be converted from SDS to a standard drill chuck in just a few steps.
The machine's chiselling function also makes it suitable for corrective chiselling work.
Ball grommet on the power cable
Prevents cable breaks, one of the most common causes of failure for mains powered machines.
Materials to be processed: Concrete, masonry, wood, metal
Nominal voltage 230 V/AC
Frequency 50 Hz
Protection class Protection class II/protective insulation
Power input 850 W
Min./max. rotation speed at nominal load 0-1300 U/min(rpm)
Min./max. impact rate 0-4000 U/min(rpm)
Tool holding device SDS-plus
Impact energy 3.2 J
Functions Chisel function
Adjustable chisel position Exchangeable chuck
Clockwise/anti-clockwise rotation Impact stop for normal drilling
Throttle switch Lock button for continuous operation
Min./max. drilling diameter in concrete 4-28 mm
Min./max. recommended drilling range for optimum performance (in concrete) 6-18 mm
Max. drilling diameter of hollow drill bit in masonry 68 mm
Cable length 4 m