For bonding metal, plastic, and rubber parts with and to each other in a matter of seconds.
Patented special cap
Easy, one-handed operation.
The tips do not become clogged.
Bonds in seconds
Immediate further processing possible.
Simple designs without additional fastening materials possible.
Increased temperature not usually necessary.
It is advisable to wear safety gloves and goggles.
The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. We do not assume any liability for a specific application result due to the large number of applications and storage and processing conditions. If our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and carry out further development.
Proof of Performance (Pub)
NSF registered, class P1, reg. no. 151993.
The parts to be adhered must be clean and free from grease.
Cyanoacrylate acidic ester
Min./max. temperature conditions
-30 bis 80 °C
Min./max. processing temperature
5 bis 35 °C
Min. processing temperature
Shelf life from production
Weight of content