Rust prevention and converter product
High-quality rust remover with cracking effect due to extreme cooling and excellent creep properties.
By cooling the material surface, e.g. on a stud bolt, down to -40°C, micro-fine cracks appear in the corrosion layer at the connection points. These crack open the rust, ensuring better penetration of the active agent.
Excellent capillary action.
In conjunction with the cracking effect, optimum creep properties ensure excellent rust penetration.
Optimum rust removal.
Quickly penetrates rust and loosens seized screws.
Heavily rusted screw connections are loosened without damage.
Corrosion protection additives for optimum protection.
Provides lasting protection against further corrosion.
Resin-free and acid-free.
Suitable for use with rubber and seals.
The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. We do not assume any liability for a specific application result due to the large number of applications and storage/processing conditions. If our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and carry out further development.
For destruction-free loosening of extremely rusty and oxidised screw connections on passenger cars, trucks, agricultural and construction machinery, assemblies and devices.
InstructionsRemove as much coarse soiling as possible.
Shake can before use.
Spray seized parts (bolts) from the shortest possible distance and allow to work for approx. 1–2 mins.
Repeat the process for stubborn connections.
Container Aerosol can.
Min. temperature conditions -10 °C.
Max. temperature conditions 40 °C.
Conditions for viscosity of oil basis at 40°C.
Flashing point of active ingredient -80 °C.