How to prepare the wall surface.
The surface must be dry, smooth, clean and of a uniformly absorbent quality. Where patterns have a light-colored basis, color variations in the undercoat may shine through! Make sure to neutralize these variations first, for example, with a pigmented wallpaper primer. Rough surfaces, holes and uneven spots should be leveled out. Remove any residues of the former wallpaper.
Paste – How to attach the wallpaper.
Spread the paste with a roller evenly across the wall and attach the dry wallpaper to the wall after it has been coated with the paste. We recommend using a special duty paste for non woven. Apply the paste across an area slightly wider than one strip. Attach the first strip in a vertical direction and press it against the wall by means of a rubber roller or a soft clothe to avoid possible air bubbles. All following the strips must be butt-joined.
Carefully dab off possible paste blobs with a damp sponge immediately and dab dry. This user guide is a recommendation only. Please contact us in case of doubt.
Photos may alter the actual colors of the product we advise that you contact an architect or a shop to be presented with the actual product.