Geländer aus Glas
NINFA 5, THE PRESENT AND THE FUTURE OF THE GLASS BALUSTRADES.
"The Result of a Teamwork".
The progenitor of the series.
Ninfa 5 was created to overcome the tests required by the regulations, even with laminated tempered glass (by AGC).
Assembly from the inside only.
Also available with integrated LED system.
RECOMMENDED USE DESTINATIONS:
Fixed to the floor
Fixed in the floor
The Ninfa 5 system also respects all the pluses of the fourth generation:
• assembly and adjustment only from the inside;
• absolute assembly speed, even ameliorated;
• also designed to house the LED;
• Faraone technology.
The certificate from the certification bodies guarantees the usual safety for Ninfa 5:
A multiuse profile for 10+10 (tempered or untempered) glass or 12+12 tempered glass.
The new accessories for fixing the glass, the dimensions, the geometry, the elasticity and the robustness are the results of the design in order to pass the test during the examinations done according to the Ministerial Decree of 17/01/2018 and the UNI 11678 norms of 15/05/2017.
• 200 kg/m (tested up to 300 kg/m) with untempered 10+10 mm Stratobel Strong glass, max H 110 cm
• 300 kg/m (tested up to 450 kg/m) with 10+10 mm glass (temp. ind), max H 110 cm
• 300 kg/m (tested up to 450 kg/m) with 12+12 mm glass (temp. ind), max H 180 cm
Ninfa 5 is a product tested and certified at the Polytechnic of Milan.
The system is designed to work even with non-tempered glass.
With non-tempered laminated Stratobel Strong AGC glass, it exceeds the UNI 11678 class of 200 kg/m.
With tempered laminated glass, it exceeds the UNI 11678 class of 300 kg/m.
ASSEMBLY IN JUST 4 STEPS
1 –Drill the profile:
every 30 cm (thrust resistance class 200 kg/m)
every 20 cm (thrust resistance class 300 kg/m).
Insert the fastening screws and the rigid gasket in their place.
2 – Insert the glass in the profile.
3 – Adjust the glass with the fastening screws. Clamp down the internal and external adjusting screws in order to fasten the glass.
4 –Check that everything is well done. Snap-fit the cladding, which already has the gaskets on.
THE FIFTH GENERATION
Ninfa 5 and its family. Totally adjustable systems on one side only.
The new Ninfa range with profiles designed to be even more performing and to adapt even better to each use destination.
NINFA 5, NINFA 55, NINFA 105, NINFA 175, NINFA 185, NINFA 195, NINFA STADIO